Stay informed about the latest developments in communication infrastructure, power storage technology, outdoor cabinet design, and renewable energy solutions.
The Juba Solar Power Station is a proposed 20 MW (27,000 hp) solar power plant in South Sudan. The solar farm is under development by a consortium comprising Elsewedy Electric Company of Egypt, Asunim Solar from the United Arab Emirates (UAE) and I-kWh Company, an energy consultancy firm also based in the UAE.
Most of the electricity in the country is concentrated in Juba the capital and in the regional centers of Malakal and Wau. At that time the demand for electricity in the county was estimated at over 300 MW and growing. Nearly all electricity sources in the country are fossil-fuel based, with attendant challenges of cost and environmental pollution.
The solar farm will have an attached battery energy storage system rated at 35MWh. The off-taker is the South Sudanese Ministry of Electricity, Dams, Irrigation and Water Resources, represented by South Sudan Electricity Corporation, the national electric utility parastatal company.
This power station is an attempt to (a) diversify the country's generation mix (b) increase the country's generation capacity and (c) increase the number of South Sudan's homes, businesses and industries connected to the national grid. The power station is reported to cost an estimated US$45 million to construct.
For certain projects, backup power must be provided for the BESS auxiliary load as required by the BESS supplier or fire codes. Some BESS suppliers mandate uninterrupted power to maintain the operation of thermal management systems, ensuring battery temperatures remain within desired limits to minimize degradation.
Project owners are also responsible for the electricity costs associated with the BESS auxiliary load during operation. The electricity cost for auxiliary loads depends on the energy consumption (kWh) and the pricing structure set by independent system operators or utilities. For example:
Some BESS suppliers mandate uninterrupted power to maintain the operation of thermal management systems, ensuring battery temperatures remain within desired limits to minimize degradation. BESS fire safety standards, such as NFPA 855, outline minimum requirements for backup power for fire safety systems.
If a BESS product cannot meet these backup power requirements as mandated by the code or the Authority Having Jurisdiction (AHJ), an external backup power source needs to be provided. Options for backup power include local distribution network feeders (if available with sufficient kVA rating) or backup generators.
Similarly, E S is the maximum energy storage capacity in the specification of BESS. C-rate is used as the parameter to describe the charging and discharge speed, which is calculated as (3) C rate = I A Q S A h ≈ * E rate = P W E S W h = I A * U (V) ∫ 0 S (Q i A h * U i (V)) where the I and P are the current and power, respectively.
The mobility and flexibility of the system enables novel applications and deployments where BESS previously were unused due to the non-flexible solutions. The system is modular, meaning that the energy storage capacity can be quickly adapted depending on the application case, in contrast to larger and bulkier solutions.
There are prevailing physical combinations of BESS integration in the power system. For example, using BESS together with renewable energy resources creates opportunities for synergy, including PV, wind power, hydropower, and with other components such as fuel cells, flywheels, diesel generators, EVs, smart buildings, etc.
The system is built of two main blocks. The PCS building block, responsible for the main control of the mobile BESS. The nominal power rating of the PCS block is 225 kVA, with a maximum peak power in the peak shaving mode of 275 kW . The second block is the modular battery pack.
